您的當前位置：
中鑄首頁
>> 案例展示
>>
客戶案例
>>
中鑄機械浙江仙都縫紉設備造型線使用案例
浙江縉云仙都縫紉設備有限公司于2019年10月采購中鑄機械兩臺610mm X 710mm水平全自動造型機配6條雙排鏈板澆注線，每臺機器各配三條雙排鏈板線，上圖為第一臺機器調試完畢投產初期所拍攝
Zhejiang Jinyun Xiandu sewing equipment Co., Ltd. purchased two 610mm x 710mm horizontal full-automatic molding machines with six double row chain plate casting lines in October 2019. Each machine is equipped with three double row chain plate lines. The above picture is taken at the initial stage after the commissioning of the first machine
通過全自動造型機射砂壓實造型完畢的砂型效果圖片，以生產縫紉機機頭為主，模具排版根據不同規格設計，最多可一模出六個鑄件形體
The first mock exam is made by the automatic molding machine, and the sand mold is finished with the sand mold. The mould is mainly designed for different sizes, and the most can be cast out of six casting shapes.
造型機生產完成的砂型砂胚經過鏈板線逐步向尾端傳動，將砂型完整排列好等待澆注工人的澆注，砂型的水口尺寸（即水口棒的尺寸）根據產品鑄件的單模鐵水量設計，方便快速澆注及鑄件冷卻補縮！同時于砂型的上箱我們為其設計了排氣口。
The sand mold produced by the molding machine is gradually driven to the tail end through the chain plate line, and the sand mold is completely arranged to wait for the pouring of the pouring workers. The size of the sand mold nozzle (i.e. the size of the nozzle bar) is designed according to the single mold iron quantity of the product casting, which is convenient for rapid pouring and cooling and feeding of the casting! At the same time, we designed the exhaust port for the upper box of the sand mold.
由造型機生產出來的縫紉機頭鑄件毛培件，將通過工人的加工組裝成成品出口國外！
By the molding machine production of sewing machine head casting maopei pieces, will be assembled through the processing of workers into finished products exported to foreign countries!
上圖為中鑄機械石廠長為客戶呂總規劃現場講解鑄造生產線的整體設計方案以及中鑄石廠長帶呂總到安徽阜陽客戶工廠實地考察鏈板線時所拍攝紀念！
The picture above shows the director of zoomzu planning and explaining the overall design of the casting production line for the customer, Mr. LV, and the commemoration of zoomzu director taking Mr. Lv to visit the chain plate line in Fuyang customer factory, Anhui Province!
更多關于了解縫紉機的鑄件造型生產請點擊此處跳轉??！
浙江縉云仙都縫紉設備有限公司于2019年10月采購中鑄機械兩臺610mm X 710mm水平全自動造型機配6條雙排鏈板澆注線，每臺機器各配三條雙排鏈板線，上圖為第一臺機器調試完畢投產初期所拍攝
Zhejiang Jinyun Xiandu sewing equipment Co., Ltd. purchased two 610mm x 710mm horizontal full-automatic molding machines with six double row chain plate casting lines in October 2019. Each machine is equipped with three double row chain plate lines. The above picture is taken at the initial stage after the commissioning of the first machine
通過全自動造型機射砂壓實造型完畢的砂型效果圖片，以生產縫紉機機頭為主，模具排版根據不同規格設計，最多可一模出六個鑄件形體
The first mock exam is made by the automatic molding machine, and the sand mold is finished with the sand mold. The mould is mainly designed for different sizes, and the most can be cast out of six casting shapes.
造型機生產完成的砂型砂胚經過鏈板線逐步向尾端傳動，將砂型完整排列好等待澆注工人的澆注，砂型的水口尺寸（即水口棒的尺寸）根據產品鑄件的單模鐵水量設計，方便快速澆注及鑄件冷卻補縮！同時于砂型的上箱我們為其設計了排氣口。
The sand mold produced by the molding machine is gradually driven to the tail end through the chain plate line, and the sand mold is completely arranged to wait for the pouring of the pouring workers. The size of the sand mold nozzle (i.e. the size of the nozzle bar) is designed according to the single mold iron quantity of the product casting, which is convenient for rapid pouring and cooling and feeding of the casting! At the same time, we designed the exhaust port for the upper box of the sand mold.
由造型機生產出來的縫紉機頭鑄件毛培件，將通過工人的加工組裝成成品出口國外！
By the molding machine production of sewing machine head casting maopei pieces, will be assembled through the processing of workers into finished products exported to foreign countries!
上圖為中鑄機械石廠長為客戶呂總規劃現場講解鑄造生產線的整體設計方案以及中鑄石廠長帶呂總到安徽阜陽客戶工廠實地考察鏈板線時所拍攝紀念！
The picture above shows the director of zoomzu planning and explaining the overall design of the casting production line for the customer, Mr. LV, and the commemoration of zoomzu director taking Mr. Lv to visit the chain plate line in Fuyang customer factory, Anhui Province!
更多關于了解縫紉機的鑄件造型生產請點擊此處跳轉??！
